REPRODUCTION
Free Shipping In The USA
REPRODUCTION. You are purchasing a replacement sending unit. The mounting o-ring and lock ring are included. The sending unit mount should be oiled prior to installation. Use a lubricant like WD-40 in the two holes on the back of the mount, then move the float arm up and down a few times. This unit is 90 ohms. If you want to test your sending unit, please see our "Instructions" tab.
This unit is a different style than the original unit on your vehicle. This is a replacement style and requires blocking off the return fuel line during installation. This sending unit will still work with your original fuel gauge with no modifications.
ATTRIBUTES:
Inlet: 1/4 Inch (0.25 Inch)
Outlet: 3/8 Inch (0.375 Inch)
Ring Inner Diameter: 3.10 Inches
Ring Outer Diameter: 3.80 Inches
Ring Thickness: 0.22 Inch
Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.
Instructions |
---|